一种基于新度量准则的极化码SCLF译码算法
DOI:
作者:
作者单位:

重庆邮电大学光电信息感测与传输技术重庆市重点实验室

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学(61971079); 重庆市(重庆邮电大学)研究生科研创新项目资助(CYS20266)


A SCLF Decoding Algorithm of Polar Codes Based on the New Measurement Criteria
Author:
Affiliation:

Chongqing Key Laboratory of Photoelectronic Information Sensing and Transmitting Technology,Chongqing University of Posts and Telecommunications

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为了解决串行抵消(Successive Cancellation, SC)译码算法在中短码长情况下译码性能不佳的问题,在SC译码算法的基础上增加路径列表和比特翻转方法得到一种改进的串行抵消列表翻转(Successive Cancellation List Flip, SCLF)译码算法。该算法利用比特翻转构建最不可靠的信息位集合称为翻转集合(Flipping Set, FS),同时提出一种新的度量法则来缩小FS的范围和提高FS的准确率。仿真结果表明,随着信噪比的增大,所提出的SCLF译码算法误块率(Block Error Rate, BLER)有较大提升,当BLER=10-3时,SCLF(N=256,L=8)译码算法的增益比SC(N=256)译码算法提高了0.55 dB;当BLER=10-4时,SCLF(N=256,L=8)译码算法的增益比CA-SCL(N=256,L=8)译码算法提升了0.22 dB;当BLER=10-5时,SCLF(N=256,L=16)译码算法的增益比CA-SCL(N=256,L=16)译码算法提升了0.17 dB。

    Abstract:

    In order to solve the problem of the worse decoding performance of the Successive Cancellation (SC) decoding algorithm under the medium/short code lengths, an improved Successive Cancellation List Flip (SCLF) decoding algorithm is proposed by adding the path list and bit-flipping method on the basis of the SC decoding algorithm. The algorithm uses the bit-flipping to build the most unreliable information bit sets called as the flipping set (Flipping Set, FS), and a new measurement Criterion is proposed to reduce the range of the FS and improve the accuracy of the FS. The simulation results show that the proposed SCLF decoding algorithm can greatly improve the Block Error Rate (BLER) with the increase of the signal-to-noise ratio(SNR). The gain of the SCLF (N=256, L=8) decoding algorithm is 0.55dB more than that of the SC(N=256) decoding algorithm at BLER=10-3; the gain of the SCLF (N=256, L=8) decoding algorithm is 0.22dB more than that of the CA-SCL (N=256,L=8) decoding algorithm at BLER=10-4; the gain of the SCLF (N=256, L=16) decoding algorithm is 0.17dB more than that of the CA-SCL (N=256,L=16) decoding algorithm at BLER=10-5.

    参考文献
    相似文献
    引证文献
引用本文
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2021-09-02
  • 最后修改日期:2021-09-02
  • 录用日期:2021-09-06
  • 在线发布日期:
  • 出版日期:

漂浮通知

①《半导体光电》新近入编《中文核心期刊要目总览》2023年版(即第10版),这是本刊自1992年以来连续第10次被《中文核心期刊要目总览》收录。
②目前,《半导体光电》已入编四个最新版高质量科技期刊分级目录,它们分别是中国电子学会《电子技术、通信技术领域高质量科技期刊分级目录》(T3)、中国图象图形学学会《图像图形领域高质量科技期刊分级目录》(T3)、中国电工技术学会《电气工程领域高质量科技期刊分级目录》(T3)和中国照明学会《照明领域高质量科技期刊分级目录》(T2)。
③关于用户登录弱密码必须强制调整的说明
④《半导体光电》微信公众号“半导体光电期刊”已开通,欢迎关注